RetroPie comes with multiple arcade emulators and each emulator requires a specific romset to work. Fba v0.2.97.43 is relatively new, they updated a bunch of roms. You specifically need an fba v0.2.97.43 romset (I'm sure google will be of some help).
I spent one year building an arcade machine. I found myself installing and reinstalling RetroPie on my Raspberry Pi a million times to get it right for the type of work I wanted to do. Every time I needed to reinstall, I had to reconfigure the entire system by following the same steps repeatedly.
Retropie Neo Geo Roms Not Working
The reinstalling was mostly because of the lack of information about many setup choices you have to make if you want to get the most out of your Raspberry Pi.
Installing RetroPie
The first step is burning the RetroPie image into the SD card.
Bios or not (though it's required) you need the correct ROMset to run with the Emulators in RetroPie. As u/DividedbyZero pointed out as well as the Official documentation you'll need the.40 ROMset (Or.42 which is the most current but not sure if the romset changed) to run with the lr-fbalpha Emulator. NEO-GEO (Bios File) NIghtmare in the Dark; Pochi & Nyaa; Power Instinct Matrimelee; Samurai Showdown / Samurai Spirits (NGH-045) What I am seeing could be what others on Reddit/RetroPie are seeing when they do not see artwork after scraping. Not sure but hopefully we can look at the below and figure out why its not pulling the artwork correctly.
- Step 1. Identify which model of the Raspberry Pi you have.
- Step 2. Connect a compatible SD card to your computer.
- Step 3. Download and install the official Raspberry Pi Imager.
- Step 4. On the Raspberry Pi Imager, go to Operating System → RetroPie and select the version that belongs to your Raspberry Pi model. Also, choose your SD card.
- Step 5. Extract and reinsert the SD card into your computer.
- Step 6. Format a USB drive as
FAT
. Use any disk utility available on your OS for it. - Step 7. Create a folder named
retropie-mount
on the root of the USB drive. It will be used by RetroPie every time you boot the system. - Step 8. Edit the file
/config.txt
and add (or uncomment if it's already there): - Step 9. Edit the file
/cmdline.txt
and write at the end: - Step 10. Force the sound to go through HDMI by adding the following line to the file
/config.txt
: - Step 11. Increase the sound quality by updating the
/retroarch.cfg
file with: - Step 12. Set up each button of your controller. For an arcade machine (Xin-Mo controller), I recommend using the same distribution as the Sega Genesis controller. For any control that you don't need to set, keep pressing any key to choose
-NOT DEFINED-
. - Step 13. Press
Start
to open the menu, then selectConfigure input
, this time keeping any button of the second controller pressed. - Step 14. Unplug the USB drive from the Raspberry Pi and plug it into your computer.
- Step 15. Place the ROMs into its corresponding console folder. Avoid zip files because they are not supported.
- Step 16. Plug the USB drive into the Raspberry Pi and wait until the drive's LED stops blinking.
- Step 17. Reset EmulationStation going to Start (menu) → Quit → Restart EmulationStation
- Launch a Megadrive/Genesis game and go to the RetroArch menu ('Select' + 'X').
- Go to Quick Menu → Options and set the two input devices to six buttons pad.
- Exit the RetroArch menu.
- Get the Neo Geo BIOS: There is plenty of sites where you can find the neogeo.zip file you need.
- Copy the zip file (compressed) to /retropie-mount/BIOS and /retropie-mount/roms/neogeo
- Move ROMs as zip files (compressed) to /retropie-mount/roms/neogeo
- Restart EmulationStation.
- Open a game and press any key before it loads.
- Go to Select emulator for ROM → lr-fba (or any other emulator) → Exit without launching.
- Relaunch the game manually.
- If the game still doesn't work, try the same steps with another version of the game.
- Connect the Raspberry Pi to the Internet.
- Go to the RetroPie settings: 'RetroPie' → 'Retropie setup'. The first time getting there can take several minutes.
- Install DosBox: 'Manage packages' → 'manage optional packages' → 'dosbox' → 'install from binary'. It will take some time because it needs to download packages from the Internet.
- When it ends, go back to the main menu, then restart the system: 'Perform reboot'.
- For Raspberry Pi Zero and 1, ROMs have to be version 0.37b5 (mame2000).
- For Raspberry Pi 2, 3, 4, and 400, ROMs have to be version 0.78 (mame2003).
- Copy zip ROMs to the folder /ROMs/arcade.
- Do not use folders specific for emulators, like
/mame-xxxx
. - Upload compressed (.zip) ROMs. Folders won't work.
- For Raspberry Pi Zero and Pi 1, choose
mame4all
(mame2000). - For Raspberry Pi 2, 3, 4 and 400, choose
lr-mame2003
(mame2003).
Games: SD card or external drive?
From here, you have two options: installing games into the SD card (efficient when your SD card is big enough) or installing them on an external drive (most ideal for small SD cards).
If you prefer to keep games and RetroPie on the same SD card, you can avoid the section 'Setting up the external USB Storage'.
To install games on an external USB drive, do not plug the SD card into the Raspberry Pi.
You'll notice the SD card is now called boot
.
Setting up the external USB Storage
Keeping the games (ROMs) and the saved games progresses in an external source makes it easier to experiment with RetroPie in the SD card, keeping the critical data safe in a plug-n-play source.
It's also a good option when you have a small SD card with enough space for no other thing than RetroPie.
Find more info about this in the official RetroPie documentation.
Overclocking the Raspberry Pi
If you have an old model of Raspberry Pi or a Raspberry Pi Zero,it is recommendable to overclock your board. That way, you can run games that require more power. For example, a Raspberry Pi Model 1 and Zero can't run most of the Neo Geo or MS-DOS games, but an overclocked Pi can do it.
There are two ways to overclock a Raspberry Pi: the wrong one and the right one.
The wrong way lets you expand the core and memory as you wish, but it's dangerous to your board and voids the warranty.
Raspberry Pi provides an official way to do it right: Introducing Turbo Mode: up to 50% more performance for free.
I recommend you to do it in the right way:
Setting up an arcade controller
It took me a while to understand how to set up an arcade controller. Even though the documentation is right there, I didn't know the arcade controllers' name was Xin-Mo.
There are a few more steps to configure the controller but wait until turning on the system.
HDMI sound
If you're using a computer monitor like me, it probably doesn't have built-in speakers. In some cases, this kind of monitor has a 3.5mm jack to output sound to external speakers. In that case, you may have to make that the HDMI takes control over the sound:
The headphone jack's sound is a lot clearer with a lot less static using that configuration.
Now turn on the Raspberry Pi
Plug the SD card and the USB drive into the Raspberry Pi and turn it on. As it is the first time to run RetroPie, it will take some time to process.
The first screen to appear is to set up the controllers:
Setting up the controllers
You can change this later and also set up different controller distributions for individual consoles and games.
The A button becomes the Enter key, and the B button becomes Escape.
To set up the controller for the second player:
Installing games
That was all related to the initial setup. Now it's all about games!
If you followed the steps to install games on the SD, follow the official documentation about all the possible ways to transfer ROMs.
To install games in the external USB drive and if you followed the steps detailed on Setting up the external USB Storage, then:
Now the folder /retropie-mount
should have some folders inside:
ROMs
All the game ROMs must go inside the folder /retropie-mount/roms
.
The ROMs are now on EmulationStation. You're going to see them in the main menu of RetroPie under the console name. Repeat steps 14-17 to add more ROMs.
Specific setups
Following the steps above, you'll have access to the most common consoles and games. But by following a few more steps, you can go beyond that.
Sega Megadrive/Genesis buttons
The Sega emulator recognizes only three buttons by default (Megadrive controller). In my case, I had installed six buttons in my arcade cabinet, so I activated all of the buttons (like a Genesis controller):
Neo Geo BIOS
This emulator works a little differently from the other ones. Before copying ROMs, you need to:
Note: Most of the games won't work the first time, but you can change the emulator for those specific games:
Visit this complete video tutorial for more info: How to Set Up And Use NEOGEO Emulator Retropie Raspberry pi 1 2 3 and Zero.
MS-DOS emulator
Beyond this point, you'll need to use a keyboard.
Now MS-DOS is a console in the list of consoles. A new folder /retropie-mount/roms/pc will also be created automatically in the USB drive.
Visit this complete video tutorial for more info: Simple DOSBox Setup RetroPie MS-DOS Raspberry Pi.
MAME emulators
I had the worst experience trying to understand this platform. I recommend to play arcade games on Neo Geo or find a version of the games for a more common console. In case you choose to use MAME, this is what worked for me.
There are different versions of MAME that were launched in different years. So, for example, if you have the emulator for MAME 0.37b5, you must get games with the specific version 0.37b5. For some versions, the games are far more challenging to get than others. Another factor that determines which version you need is the Raspberry Pi model.
Then to copy ROMs:
The first time a game is running, it will ask for an emulator to run:
And
That's all far I could go. I'll update this guide as I find more and better solutions.
Download section for Neo Geo ROMs of Rom Hustler. Browse ROMs by download count and ratings. Download Neo Geo ROMs quickly and free. The Neo Geo filled a niche market of expensive. NEO-GEO BIOS Not Working? Http:// Put the new renamed asia-s3.rom into neogeo.zip. Neo Geo requires a neogeo.zip BIOS file. Geo- Piarcade. Which emulator do you want to use playing neo geo roms (calice, aes4all, neoragex, gngeo, neomame)? On retropie there are three emulator: lr-fbalpha, PiFBA, GnGeo-Pi « Last Edit: January 31, 2017, 12:15:35 AM by hermine.potter ». Final Burn Alpha is a Multiple Arcade Emulator most popular for emulating Neo-Geo, Capcom, Konami, and Cave games. It is developed by the final burn team and originated from FinalBurn by Dave. Neo Geo Zip Bios File Neo Geo Bios Retropie. There are significant differences in performance, compatibility, and configuration between them. If you're getting started with arcade emulation, start by reading Arcade. How to Set Up And Use NEOGEO Emulator Retropie Raspberry pi 1 2 3 and Zero AMAZON LINKS Buy a Raspberry Pi and accessories on Amazon Raspberry Pi 3 - http://amzn.to.
Validating, Rebuilding, and Filtering Arcade ROMs Note: If you're getting started with an arcade emulation project, begin by reading [[Managing Arcade ROMs Managing ROMs]]. See also:, Table of Contents • • • Crash Course in Arcade ROMs Arcade Emulator Terminology • ROM, ROM set, and romset: Arcade games are packaged as zip files, most of which are composed of more than one individual 'ROM' files. That is why some resources refer to an individual arcade game as a ROM (like people use to describe a zipped game cartridge ROM) while other resources refer to an individual game as a ROM set or romset.
GET A RASPBERRY PI3 ON AMAZON HERE- NEO-GEO Retropie WIKI- Retropie 4.0 TRANSF. Because it's very simple to find it. After you found it, put it in the same folder as your NeoGeo roms. By the way, the FB Alpha Neo Geo core on the 3DS is using the previous FB Alpha 0.2.97.29 build (known also as FB Alpha 2012). The rom naming scheme should be for this version (because it can change in later versions).
Retropie Neo Geo Roms Not Working
• ROM version or ROM set version: Each version of an arcade emulator must be used with ROMs that have the same exact version number. For example, MAME 0.37b5 ROMs are required by the MAME4ALL emulator, but will not work correctly with the lr-mame2010 emulator, which requires MAME 0.139 ROMs.
• Sample: Some games require an additional zip file with recorded sounds or music in order for audio to work correctly. The path where these samples should be copied varies from emulator to emulator. • CHD: Some MAME games require data from an internal hard drive, CD-ROM, laserdisk, or other media in order to be emulated -- those forms of media are packaged as CHD files. CHD files should be copied to subfolders within the folder where the MAME ROM zips have been installed.
More so, you can race bikes, cars, boats, or even horses. And these offer a wide variety of different environments, such as a standard race track, a zigzag track, on land, on water, on snow.
In addition to having a version number, arcade ROMs can be formatted three ways: • Non-merged: All ROMs can be used standalone because each zip contains all the files needed to run that game, including any files from 'parent ROMs'. This is the recommended format for RetroPie arcade emulators. • Split: Some ROMS that are considered clones, translations, or bootlegs also require a 'parent ROM' to run. The parent ROM is often the first or most common variant of a game.
Mame Neo Geo Unibios
In some cases the parent is not the most popular or best working version of the game, however. For example, in a Split set pacman.zip (a clone), will not work without puckman.zip (its parent). • Merged: Clones are merged into the parent ROM zip, meaning that more than one game is stored per file. Merged ROM sets are not recommended. Correct ROM versions are essential So how do you tell you have the right ROM if you aren't sure that your set matches the version required by the emulator you chose? What if you don't have the right version? It is possible to 'rebuild' from one version of an arcade ROM collection to another.